Arctic Synthetic Grease
Arctic Synthetic Grease
AMSOIL Arctic Synthetic Grease provides extreme low-temperature pumpability and superior protection for equipment operating in harsh climates where temperatures drop well below freezing, ensuring superior load and wear protection where conventional greases are ineffective.
Performance Features
- Outstanding cold-temperature pumpability
- Excellent mechanical stability
- Superior protection against wear and corrosion
- Long service life
- Withstands high loads and pressures
Application Recommendation
AMSOIL Arctic Synthetic Grease is recommended for industrial machinery, heavy-duty
automotive and industrial equipment, chassis, bearings, off-road and heavy
equipment operating in arctic climates.
Compatibility
AMSOIL Arctic Synthetic Grease is compatible with many other types of greases.
However, it is recommended that when changing greases, the equipment be
cleaned of the old grease when possible or flushed with a liberal amount of Arctic
Synthetic Grease while the mechanism is in operation. Closely monitor the system
for any inconsistencies. Grease compatibility questions should be referred to your
AMSOIL representative or AMSOIL INC.
AMSOIL PRODUCT AVAILABILITY
AMSOIL Arctic Synthetic Grease is available in
15-ounce cartridges.
HEALTH & SAFETY
This product is not expected to cause health concerns when used for the intended
application and according to the recommendations in the Material
Safety Data Sheet (MSDS). An MSDS is available via the Internet at www.amsoil.com
or upon request at (715) 392-7101. Keep Out of Reach of Children. Don’t pollute.
For warranty information, visit Warranty Information
Thickener | calcium sulfonate complex |
NLGI consistency grade | 1 |
Penetration (25°C [77°F], 0.1 mm) worked 60 strokes (ASTM D217) | 310-340 |
Operating Range, °F (°C) | -75 to 315 (-59 to 157) |
Four-ball wear test, mm scar (ASTM D2266) | 0.51 |
Four ball EP, kgf (ASTM
D2596)
Weld point Load wear index |
400 56 |
Timken OK load test, lbs (ASTM D2509) | 60 |
Low-temperature torque, N•m (ASTM D4693) (-40°C [-40°F]) (Starting, Running torque) | 1.28, 0.58 |
LT-37 US Steel Mobility @ 0°F (g/min) | 156.5 |
US Steel Mobility @ -20°F (g/min) | 81.5 |
Dropping point, °F (°C) (ASTM D2265) | >550 (>288) |
Rust and corrosion (ASTM D1743) | pass |
Oil viscosity, 40°C (104°F), cSt (ASTM D445) | 22.30 |
Viscosity Index (ASTM D2270) | 125 |
Color | tan |
Texture | smooth |
- 15-oz. Cartridges